Application
Apply to clean, dry and bare timber using a brush or lint-free cotton cloth. For easier application, the first one or two coats can be diluted with a little white spirit.
Allow the oil to penetrate for around 20–30 minutes, then wipe away any excess with a clean, lint-free cloth. Allow approximately 24 hours between coats.
A minimum of four coats is recommended, with additional coats potentially required for porous or exterior timber. More coats will gradually increase the sheen of the finish.
For the best results, lightly rub the surface with Liberon Ultra Fine (0000) Steel Wool between coats.
Product Information
- Brand: Liberon
- Product: Pure Tung Oil
- Suitable for: Interior and exterior timber
- Finish: Long-lasting matt finish
- Application: Brush or lint-free cloth
- Coverage: Approximately 8–10m² per litre
- Drying time: 24 hours between coats
- Recommended coats: Minimum 4
- Tool cleaning: White spirit
- Suitable for food-contact surfaces
- Suitable for exterior oak
- Available in 250ml, 500ml, 1 litre and 5 litre sizes
Important Information
Tung Oil is extracted from nuts and may cause an allergic reaction. Always follow the safety information supplied with the product.
Oil finishes can significantly enhance and deepen the natural colour of timber, so always test on an offcut or inconspicuous area first.
Oil-soaked cloths and other materials can present a risk of self-combustion. Dispose of oil-contaminated materials safely and follow the manufacturer’s safety instructions.
